Product Description
Add 2 SuperSpeed USB 3.2 Gen 1 (5Gbps) ports to your PCI Express compatible PC
The PCI Express USB 3.2 Gen 1 2 Port Card PEXUSB3S25 allows you to add two USB 3.2 Gen 1 ports to any PCI Express compatible computer system, with an optional LP4 power connector to plug into your system's power supply to provide up to 900 mA per port for USB 3.2 Gen 1 bus-powered devices (500 mA for USB 2.0).
Enhanced with UASP (USB Attached SCSI Protocol), this USB 3.2 Gen 1 controller is 70% faster than a conventional USB 3.2 Gen 1 port when paired with a UASP-supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than traditional USB BOT (Bulk-Only Transport), UASP optimizes transfer by allowing simultaneous processing of multiple commands, significantly increasing transfer speeds. For more information, see the UASP test results below.
The PCI-E USB 3.2 Gen 1 adapter complies with USB 3.2 Gen 1 standards for transfer speeds of up to 5 Gb/s, while being backward compatible with existing USB 2.0/1.1 devices. For added versatility, the controller card comes with a standard height bracket and includes a low-profile/half-height bracket for compact computers.
Improved performance with UASP
UASP is supported by Windows® 8, Server 2012, and Linux kernel 2.6.3 or later. Tests show that UASP support provides read speeds up to 70% higher and write speeds up to 40% higher than the maximum capability of traditional USB 3.2 Gen 1.
Under the same conditions, UASP shows up to 80% reduction in CPU resource requirements.
The test was conducted with an Intel® Ivy Bridge system, StarTech.com USB 3.2 Gen 1 controller cards, a StarTech.com enclosure with UASP, and a SATA III SSD.
The StarTech.com Advantage
Product Features
- StarTech.com PCI Express Controller Card to 2 Ports USB 3.0 with UASP - LP4 Power.
- Host Interface: PCIe, Output Interface: USB 3.2 Gen 1 (3.1 Gen 1), Expansion Card Form Factor: Full Height / Low Profile.
- Maximum Cable Length: 3 m, Certification: CE, FCC.
- Component Set: Renesas / NEC - µPD720202, Maximum Data Transfer Rate: 5 Gbit/s.
- Windows OS Support: Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64,..., Server OS Support: Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows....
- Width: 18 mm, Depth: 82 mm, Height: 120 mm
Technical specifications
Général
Type de périphérique
Adaptateur USB
Type d'interface (bus)
PCI Express x1
Réseaux
Technologie de connectivité
Filaire
Protocole de liaison de données
USB, USB 2.0, SuperSpeed USB 3.0
Débit de transfert de données
5 Gbits/s
Normes de conformité
USB 1.1, USB 2.0, USB 3.0
Extension/connectivité
Interfaces
2 x USB 3.0 - USB 9 broches type A (externe)
Divers
Accessoires inclus
Support de fixation extra-plat
Normes de conformité
FCC, RoHS
Logiciels / Configuration requise
Logiciel(s) inclus
Pilotes de périphérique et utilitaires
Système d'exploitation requis
Microsoft Windows Vista / 7 / 8 / 8.1 / 10, Microsoft Windows Server 2008 R2, Microsoft Windows Server 2012, Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016, Microsoft Windows Server 2019, uniquement pour Linux 2.6.31 - 4.11.x LTS
Dimensions et poids
Garantie du fabricant
Service et maintenance
Garantie limitée - 2 ans
Caractéristiques d’environnement
Température minimale de fonctionnement
0 °C
Température maximale de fonctionnement
50 °C
Taux d'humidité en fonctionnement
5 - 85%
Information de compatibilité
Conçu pour
P/N: CFASTRWU3, S251SMU33EP, ST103008U2C, ST3300GU3B, ST4300U3C1, ST4300U3C1B, ST4300U3C3, ST53004U1C, ST7300U3M, ST93007U2C, UNI251BMU33, USB3S2ESATA3